INSTRUCTIONS

Thank you for choosing our IPL system,for the most effective use of the product,please read the user manual carefully before using.

1. Safety Tips

To protect the skin,it’s not suitable for the following customers:

A. You have a known skin disorder.

B. You have a skin disease such as allergic dermatitics,eczema etc.

C. Who have photosensitization.

D. IF you are experiencing Menstruation,Pregnant or Lacation.

E. If you have sunburn.

F. Black or sunburn skin(Please refer to the following specific color contrast card).

G. Black or fluoscescent nevus.

H. Broken skin,a scab or healed wound,cancer or hemangioma.

I. Your eyes and any artificial aesthetic,prosthetic or plastic area.

2. Product Introduction

2.1 Packing list:

IPL machine,Power adapter,Instruction manual(Basic set)

2.2 Structure Description

①Air outlet ②ON/OFF button ③Air inlet ④Light exit ⑤Indicator light of power level

⑥Flash button

3. Technical Parameters

Lamp tube	Xenon quarts tube
Light Source	Intense Pulsed light
Energy Frequency	1.5-3.9J/cm2
Focus size	4.2 c㎡
Wavelength	470nm-1100nm
Lamp tube life	900000 times
Adapter	AC100-240V @12V DC3A
Weight	210g（machine）
Size	143x84x48mm
Operating temperature range	5-30 ℃
Operating humidity range	Relative humidity 30%–60%

4. Functions Introduction

A. Skin rejuvenation

B. Hair removal

This product can be used for :excess hair such as lip hair,armpit hair,limb body hair,forehead hair etc.;Painless hair removel is suitable for black hair and dark-hair people,it is not suitable for white gray or blonde(Refer to the following color contrast card)

Hair color c c colo color color Skin color	White	Yellow	Medium brown	Light brown	Brown	Drak Brown/Black
White/Grey	×	×	×	×	×	×
Red	×	×	×	×	×	×
Light Red	×	×	×	×	×	×
Light Gold	√	√	√	√	√	×
Light brow	√	√	√	√	√	×
Brow	√	√	√	√	√	×
Dark blow	√	√	√	√	√	×
Black	√	√	√	√	√	×

5. FunctionsIntroduction Instructions For Use

5.1 Use a medical alcohol wipe to clean the glass window

5.2 Press the “Power button”For 1 second,it will start and enter into the working state(The green indicator light is on,and you can hear the system is running).

Note:

A. You will see the green indicator light is on after starting up.

B. Then you should move the flash window to your skin,you will see the green light flickering,because there is a human body induction sensor built-in it.And the sensor will be sense the skin when you get close to it.

C. The green light indicator must be flickering,otherwise the device will not work.IF you find that the green light is not flickering,bring it closer to your skin until it does flicker.

D. Click the power button to select the suitable intensity level(5 levels with blue indicator lights）The diagram below shows intensity level from low to high level.Any adjustment can be made in the sequence shown with a click of the power button.

Intensity Intensity Intensity Intensity Intensity Intensity

Level 1 Level 2 Level 3 Level 4 Level 5 Level A

E. Once the intensity level is set,move the flash window to the skin which can cover the flash window completely,you can see the power indicator lamp flickering and then click the flash button,then it will flash out.After every flash operation the indicator light will be turned off to charge the power,after 1-3 seconds the light will return to indicating that it is ready for use again.

Note

For perfect results,it is suggested the process of hair removel is repeated 2-3 times and ensuring all the body parts should not be repeated and omitted.

F. Press the power button 3 seconds to shut down it.

G. When finished using,please clean the flash window using the suggested medical alcohol wet-wipe(After frequent use there will be dew white spot inside the lens,this will not infect the normal use and service life of the instrument.

6.Hair Management Process

6.1 Test before use

It is strongly advised to check for adverse reaction by conducting a skin test 2 hours in advance of any hair removal procedure.

Test method:

On a small area of skin on the inside of the upper arm(The medial).From a low energy to high energy 1-2 times at the same place.After 2 hours if you feel redness,burns,stabbing painor other symptoms consult a doctor before using again.

6.2 Using Steps

A.Clean the flash window and shave the hair on your body and clean the residual hair

B.Start the device,choose the most suitable intensity level.

C.After finish hair removel,you’d better cool skin using ice water or cold damp towel.

D.You can use a toner to help your skin retain moisture after hair removel.

F.Do not use multiple times on the same part of skin.You should flash less than 2 times in succession only at one locaton.The operation frequency times should be reduced when using high energy intensity level.

Parts Skin color	White	Yellow	Medium brown	Light brown	Brown	Drak Brown /Black
Armpit	3-5 level 3-4 times	3-5 level 3-4 times	3-4 level 2-3 times	2-3 level 2-3 times	2-3level 2-3 times	Inapplicable
Arm	3-5 level 3-4 times	3-4 level 3-4 times	2-4 level 2-3 times	1-3level 2-3 times	1-3level 2-3 times	Inapplicable
Leg	3-5 level 3-4 times	2-4 level 3-4 times	2-3 level 2-3 times	1-3 level 2-3 times	1-3level 2-3 times	Inapplicable
Around mouse	3-4 level 3-4 times 3-4 times 3-4 times√	2-3 level 3-4 times	2-3 level 2-3 timess	1-2 level 2-3 times	1-2 level 2-3 times	Inapplicable
Face	3-4 level 3-4 times	2-3 level 3-4 times	2-3 level 2-3 times	1-2 level 2-3 times	1-2 level 2-3 times	Inapplicable

Note:

A.Using 6-10 times as a hair removel cycle.

B.Use one time every 2 weeks for up to 6 times

C.Use one time every 4 weeks when using 6-10 times

D.If you find new thin hair after use it,operate one time every 2-3 months at this place,and continue gaining satisfying results.

E.To gain the best results it is suggested that one area of thick hair use more times.

F.Use will vary from person to person,use less frequently when hair area grows by a small amount,about 30%.

7.Device Operation Notes

A.Do not use flash near or directly at the eyes.

B.After operation,some skin redness is normal,you can cool the area with ice water or cold damp towel.

C.Do not use in conjunction with other cosmetics such as water gel products.

D.The darker your skin,the reaction may not be so appearant and the reaction may be delayed,in this case ensure the 2 hour waiting period is followed before increaing intensity level.

E.Continue to look after your skin moisturizing and using Sun block or sunscreen.

F.Avoid uv light during use and always protect your skin when out in sun.Also try to avoid long exposure to computer radiation when working.

G.Do not block the air interlet and cooling outlet.

H.Hair stuck to the device may cause some blank spots but it does not effect the performance of the device and the normal use.

I.In the late period of life,the inner wall of the light bulb will appear different degress of black phenomenon,this is a result of normal aging process of the tubes,dont worry and continue use as normal.

J.The product is not waterproof.

K.Any faults,immedietly unplug the device.

L.Dont store the device near strong magnetic fields,moisture dustor at high temperature.

M.Avoide damage and keep out of reach and sight of children.

N.Prohibit use with other application which is not allowed.

O.Prohibit other people opening the device except our authorized persons otherwise it may be danger electric shock.